Market Analysis • November 17, 2026

October Industrial Production Fell 0.4%, While Factory Growth Leaned on Autos

•6 min read•Manufacturing

The November 17, 2026, Federal Reserve release delivered a split-screen picture: total industrial production fell 0.4% in October, but manufacturing rose 0.3%. The factory gain, however, came with a caveat stamped right into the data: manufacturing excluding motor vehicles and parts declined 0.1%. Mining and utilities drove the broader industrial pullback; autos kept manufacturing in positive territory.

Here’s what the release shows:

  • Total industrial production fell 0.4% in October, after a revised 0.7% increase in September.
  • Manufacturing rose 0.3% for a second consecutive month, but output excluding autos slipped 0.1%.
  • Mining fell 0.8% and utilities dropped 4.3%, reversing much of their recent strength.
  • Revisions weakened earlier readings: August total production shifted from +0.1% to −0.1%, while September’s reported monthly growth remained +0.7%.
  • Total and manufacturing capacity utilization remained below their long-run averages, and the Fed’s November 24 annual revision may alter the historical picture.

Autos Kept Manufacturing in Positive Territory

October’s factory increase was real, but narrow. Motor vehicles and parts output surged 4.4%, leading durable manufacturing higher. Strip out that category and manufacturing fell 0.1%. The distinction matters: the headline factory figure captures growth, while the exclusion measure shows that it did not extend across the rest of the sector.

Other details offered a mixed picture. Business equipment output rose 1.0% and stood 7.8% above its year-earlier level. But consumer goods fell 0.7%, despite an increase in automotive products, and materials declined 0.7%, with energy materials down 2.2%.

The wider trend is uneven rather than uniformly weak. Manufacturing contracted 0.2% in August, then rose 0.3% in both September and October. October manufacturing output was 2.2% above a year earlier. That annual gain argues against reading one narrow monthly increase—or one weak category—as a complete account of factory conditions.

Monthly changeJuly 2026August 2026September 2026October 2026
Total industrial production+0.2%−0.1%+0.7%−0.4%
Manufacturing+0.1%−0.2%+0.3%+0.3%
Mining+0.1%+0.8%−0.2%−0.8%
Utilities+1.1%+0.2%+4.4%−4.3%

October figures are preliminary. The table makes the central contrast plain: manufacturing held its ground, while mining and utilities pulled total production down.

Mining and Utilities Drove the Headline Decline

Mining posted its second consecutive monthly decline, falling 0.8% in October after a 0.2% drop in September. Utilities fell 4.3%, a sharp reversal following September’s 4.4% increase. The release describes utilities as falling back after that surge, but the figures provided do not establish how much of the swing reflected weather. Nor do they include the sector weights needed to calculate each industry’s precise contribution to the overall decline.

That limitation is worth keeping in view. A large percentage move in one component does not, by itself, tell us how much it moved the total index. The data support the conclusion that mining and utilities weakened; they do not support a precise attribution of October’s headline drop between the two.

Across the recent months, total production has seesawed: August and October contracted, with September’s rebound in between. October total industrial production was still 2.1% above its year-earlier level. The month-on-month fall is a clear setback, but the annual comparison and the recent factory gains complicate any simple story of broad industrial contraction.

Revisions Weakened Some Earlier Readings

The latest release changed parts of the recent history without overturning the September rebound. August total industrial production was revised from +0.1% to −0.1%, changing the month from slight growth to contraction. September’s index level was revised from 104.0 to 103.8, but its reported monthly increase stayed at 0.7%.

Manufacturing’s September monthly gain remained 0.3%, while total utilization for that month was revised from 76.9% to 76.8%. Manufacturing utilization held at 75.9%.

A longer comparison also trims earlier growth. The August 18 release had put July manufacturing growth at 0.2%; the November 17 estimate is 0.1%. July materials growth was similarly revised from 0.3% to 0.2%. These changes make the earlier growth picture somewhat less strong, but they do not establish a manufacturing recession. The supplied information does not provide comparable revision histories for mining, utilities, auto output or seasonal adjustments.

Capacity Is Slack, but Not a Recession Verdict

Capacity utilization reinforces the picture of room to spare. Total industry operated at 76.4% of capacity in October, 3.0 percentage points below its 1972–2025 average of 79.4%. Manufacturing utilization was 76.0%, 2.2 points below its long-run average of 78.2%.

The sector detail cautions against treating industry as one block. Mining utilization, at 86.4%, was above its long-run average of 85.2%. Utilities stood at 70.2%, far below their 84.0% average. Mining’s relatively high rate does not describe factory conditions, just as low utilization alone does not establish how businesses will respond or whether a recession is underway.

The evidence is better read as a warning against overclaiming in either direction. Manufacturing rose for two months and exceeded its year-earlier level, but October’s gain lacked breadth outside autos and utilization remained below average. The release itself presents these qualifications clearly; there is no material gap between its headline narrative and the figures supplied.

What to Watch in the Next Release

The next monthly report can test whether October’s factory growth broadens. A manufacturing increase excluding motor vehicles and parts, rather than another gain carried by autos, would offer stronger evidence of wider momentum. Continued declines in mining or a renewed drop in utilities would help explain whether October’s weakness persisted beyond a one-month reversal.

A larger historical checkpoint arrives sooner: on November 24, 2026, the Fed plans to incorporate Census manufacturing benchmarks for 2023 and 2024, update monthly indicators and seasonal factors, revise capacity data, and shift the index base from 2017 to 2022. The effects are not yet known. The revision could change the historical path, including measurements involving autos or high-tech manufacturing, but no specific outcome can be inferred in advance.

For now, October’s record is a split one: industrial production fell, while manufacturing eked out a gain concentrated in autos. The next monthly figures will show whether that factory increase broadens; the November 24 revision will show how much the past needs to be rewritten.

Produced with AI assistance from public data releases. For information only, not investment advice. How we work

Related Articles